Ultrasonically assisted synthesis of barium stannate incorporated graphitic carbon nitride nanocomposite and its analytical performance in electrochemical sensing of 4-nitrophenol

We describe the ultrasonic assisted preparation of barium stannate-graphitic carbon nitride nanocomposite (BSO-gCN) by a simple method and its application in electrochemical detection of 4-nitrophenol via electro-oxidation. A bath type ultrasonic cleaner with ultrasonic power and ultrasonic frequency of 100 W and 50 Hz, respectively, was used for the synthesis of BSO-gCN nanocomposite material. The prepared BSO-gCN nanocomposite was characterized by employing several spectroscopic and microscopic techniques such as X-ray diffraction, X-ray photoelectron spectroscopy, fourier transform infra-red, field emission scanning electron microscopy, and high resolution transmission electron microscopy, to unravel the structural and electronic features of the prepared nanocomposite. The BSO-gCN was drop-casted on a pre-treated glassy carbon electrode (GCE), and their sensor electrode was utilized for electrochemical sensing of 4-nitrophenol (4-NP). The BSO-gCN modified GCE exhibited better electrochemical sensing behavior than the bare GCE and other investigated electrodes. The electroanalytical parameters such as charge transfer coefficient (α = 0.5), the rate constant for electron transfer (k_s = 1.16 s⁻¹) and number of electron transferred were calculated. Linear sweep voltammetry (LSV) exhibited increase in peak current linearly with 4-NP concentration in the range between 1.6 and 50 μM. The lowest detection limit (LoD) was calculated to be 1 μM and sensitivity of 0.81 μA μM⁻¹ cm⁻²_. A 100-fold excess of various ions, such as Ca²⁺, Na⁺, K⁺, Cl⁻, I⁻, CO₃²⁻, NO₃, NH₄⁺ and SO₄²⁻ did not able to interfere with the determination of 4-NP and high sensitivity for detecting 4-NP in real samples was achieved. This newly developed BSO-gCN could be a potential candidate for electrochemical sensor applications.     

Palladium/graphitic carbon nitride catalyst for selective oxygen transfer in Wacker oxidation

Nanoscaled palladium particles supported on graphitic carbon nitride (Pd⁰/g-C₃N₄) is prepared to improve the oxygen transfer in Wacker oxidation via chemical reduction method. From the analysis of FT-IR, XRD, SEM, TEM, XPS and ICP, Pd⁰ particles are firmly combined with g-C₃N₄ layers, and sub-surface ones occupy most of the components. It is worth mentioning that graphene oxide (GO), which is completely recyclable without further pollution, can be used as a ‘solid weak acid’ taking the place of H₂SO₄ and CF₃COOH. Under the optimization conditions, as many as 46 kinds of olefins are transferred into corresponding products with satisfactory yields, and o-methyl styrene gets the highest yield of 94%. After five times of recycling experiment, the yield of acetophenone only decreases by about 7.0% in the uniform reaction process. In virtue of former research results and molecular electrostatic potential, a possible mechanism is put forward to explain the catalytic process.     

Surface influence on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel

Low-field nuclear magnetic resonance techniques are employed to extract information about the effects introduced by the interaction with the surface on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel. The molecules under study were water, cyclohexane, and hexane. They were chosen due to their different interaction strength with the carbonaceous matrix. Frequency dependent longitudinal relaxation measurements, using the fast field cycling technique, allowed extraction of the fractal dimension of the carbon xerogel surface. It was observed that the measured value is influenced by the molecule affinity to the surface. Diffusion measurements, using the pulse field gradient technique, have revealed that the stronger interaction with the surface of cyclohexane and hexane molecules leads to an increased diffusive tortuosity, as compared with water.     

The Synergistic Effect of a Bimetallic Catalyst for the Synthesis of Carbon Nanotube Aerogels and their Predominant Chirality

Synthesis of continuous spinnable carbon nanotube (CNT) fibers is the most promising method for producing CNT fibers for commercial applications. The floating-catalyst chemical vapor deposition (FC-CVD) method is a rapid process that achieves catalyst formation, CNT nucleation and growth, and aerogel-like sock formation within a few seconds. However, the formation mechanism is unknown. Herein, the progress of CNT fiber formation with bimetallic catalysts was studied, and the effect of catalyst composition to CNT fiber synthesis and their structural properties was investigated. In the case of bimetallic catalysts, the carbon source rapidly decomposes and generates various secondary hydrocarbon species, such as CH₄, C₂H₄, C₂H₂, C₃H₆, and C₄H₁₀ whereas monometallic catalysts generate only CH₄ and C₂H₄ on decomposition. CNT fiber formation with Fe₁Ni₀ begins about 400 mm from the reactor entrance, whereas CNT formation with Fe_0.8Ni_0.2 and Fe_0.5Ni_0.5 begins at about 500 and 300 mm, respectively. The formed CNT bundles and individual CNTs are oriented along the gas flow at these locations. The enhanced rate of fiber formation and lowering of growth temperature associated with bimetallic catalysts is explained by the synergistic effects between the two metals. The synthesized CNTs become predominantly semiconducting with increasing Ni contents.     

General Formation of Macro-/Mesoporous Nanoshells from Interfacial Assembly of Irregular Mesostructured Nanounits

Mesoporous core–shell nanostructures with controllable ultra-large open channels in their nanoshells are of great interest. However, soft template-directed cooperative assembly to mesoporous nanoshells with highly accessible pores larger than 30 nm, or even above 50 nm into macroporous range, remains a significant challenge. Herein we report a general approach for precisely tailored coating of hierarchically macro-/mesoporous polymer and carbon shells, possessing highly accessible radial channels with extremely wide pore size distribution from ca. 10 nm to ca. 200 nm, on diverse functional materials. This strategy creates opportunities to tailor the interfacial assembly of irregular mesostructured nanounits on core materials and generate various core–shell nanomaterials with controllable pore architectures. The obtained Fe,N-doped macro-/mesoporous carbon nanoshells show enhanced electrochemical performance for the oxygen reduction reaction in alkaline condition.     

Pyridinium-functionalized metalloporphyrins as bifunctional catalysts for cycloaddition of epoxides and carbon dioxide

New pyridinium-functionalized metalloporphyrins MEtPpBr₄ (M = Zn²⁺, Co²⁺, Ni²⁺, Cu²⁺; EtPp = 5, 10, 15, 20-tetra(4-(3-(N-ethyl-4-pyridyl)pyrazolyl)phenyl)porphyrin) were synthesized as bifunctional catalysts for the cycloaddition reactions of epoxides and CO₂. The effects of catalyst loading, CO₂ pressure, reaction temperature and time on catalytic activity were investigated. ZnEtPpBr₄ ( 1 ) and CoEtPpBr₄ ( 2 ) exhibited efficient activities in the cycloaddition reactions of various epoxides with CO₂ as at 120 °C under 2 MPa of CO₂ pressure without solvent. Most of corresponding cyclic carbonates could be obtained in almost quantitative yields and > 99.9% selectivity with molar ratio of epoxide/catalyst 2222 after 8 hr of reaction.     

Molecularly Engineered 6FDA-Based Polyimide Membranes for Sour Natural Gas Separation

Glassy polyimide membranes are attractive for industrial applications in sour natural gas purification. Unfortunately, the lack of fundamental understanding of relationships between polyimide chemical structures and their gas transport properties in the presence of H₂S constrains the design and engineering of advanced membranes for such challenging applications. Herein, 6FDA-based polyimide membranes with engineered structures were synthesized to tune their CO₂/CH₄ and H₂S/CH₄ separation performances and plasticization properties. Under ternary mixed sour gas feeds, controlling polymer chain packing and plasticization tendency of such polyimide membranes via tuning the chemical structures were found to offer better combined H₂S and CO₂ removal efficiency compared to conventional polymers. Fundamental insights into structure–property relationships of 6FDA-based polyimide membranes observed in this study offer guidance for next generation membranes for sour natural gas separation.     

Sensitive and selective determination of 4-nitrophenol in water and food using modified polyethyleneimine-capped carbon dots

Hazardous 4-nitrophenol (4-NP) has created serious threats to humans and the environment; therefore, it is highly desirable to develop a facile and practical method for the monitoring of 4-NP in environment and food. Here, a fluorescence method based on modified polyethyleneimine-capped carbon dots (mPEI-CDs) was developed for sensitive and selective determination of 4-NP in water, fruit, and vegetable samples. First, highly fluorescent mPEI-CDs (quantum yield about 40.3%) were easily synthesized via a one-step hydrothermal method by using novel acetic anhydride modified polyethyleneimine (mPEI) and citric acid as precursors. Compared to the unmodified PEI-CDs, the acetic anhydride mPEI-CDs exhibited excellent fluorescent stability in a wider pH range of 4.0–9.0. Under pH 8.0, a selective determination of 4-NP was achieved based on the inner filter effect (IFE) mechanism. After optimization, good linear relationships between fluorescence intensity function (F₀-F)/F₀ and the concentration of 4-NP were obtained in ranges of 0.5–10 and 10–100 μM, respectively, while efficiently avoiding the interferences from two other nitrophenol isomers, possible coexisting metal cations and anions in samples. Finally, the proposed approach was successfully applied for the determination of 4-NP in water, honey, strawberry, and tomato samples.     

On the mechanism of microporous carbon supercapacitors

Microporous carbon shows the highest supercapacitor performance among other carbon nanomaterials, and thus, is considered as the most promising candidate for the fabrication of high-performance supercapacitors. However, it has puzzled the researchers as micropores do not have enough space for the formation of the so-called double layer. Several models have been proposed to explain the mechanism of energy storage by microporous supercapacitors. The most common one is that the micropores are initially filled by both anions and cations, and charging/discharging is via ion-exchange through these single row-filled micropores. Although this theory has been supported by several computational calculations, it is discussed here that this model is in disagreement with the experimental facts commonly accepted in the literature.     

The unusual tribological behavior of diamond-like carbon films under high vacuum

We fabricate F-doped and F-S-codoped diamond-like carbon (DLC) films using plasma-enhanced chemical vapor deposition system. The hardness, Raman spectra, and high-vacuum tribological behaviors indicate that the films are DLC films. The hardness is close related to the tribological properties of DLC films under high vacuum. The high hardness of DLC films would be helpful for obtaining the long lifetime under high vacuum. The lifetimes of F-S-codoped DLC films are about 120 and 140 seconds, which is attributed to the fast graphitization under high vacuum. The lifetime of F-doped DLC films is prolonged to the value of around 300 and 440 seconds, X-ray photoelectron spectroscopy analysis exhibits the existence of the “adsorption” F, and transmission electron microscopy analysis shows that the “adsorption” F could react with Fe to form layered FeF₂ nanocrystal at the initial sliding, which could be helpful for prolonging the lifetime of F-doped DLC films under high vacuum. This investigation opens a new window to overcome the disadvantage of F, S-doped DLC films under high vacuum.